The TL3 thermometer is an ergonomically advanced version of our proven TL1-A, which is a preferred temperature instrument used by hundreds of companies in the pipeline, pharmaceutical and food industries.
The TL3 incorporates a larger display and an easier to hold shape with the same specifications for high accuracy and long term stability established by the TL1-A. The rugged enclosure is designed to withstand use in the field, factory or lab. Through numerous distributors equipped for calibration and repair, the TL3 can be supported in many locations throughout the world.
A one year warranty, protective case and NIST traceable 4 point calibration report are included.
Accuracy +/- 0.06°C (0.1°F)
Standard 4 Point Calibration: 0°C (32°F) , 49°C (120°F) , 93°C (199°F) & 149°C (300°F)
Resolution: 0.01 Degrees
Range: -40°C to 204°C (-40°F to 400°F)
Temperature Time Constant: 6.5 seconds in circulated water bath
(63.2% response to temperature change)
Recommended Immersion Depth: 4″ (11cm)
0.5″ (1.3cm) character LCD
Switchable units °C or °F
Resolution 0.1 or 0.01
Low Battery & Fault Indication
Continuous operation or Auto Off after 20 minutes.
Stores and displays Average, Lowest & Highest readings.
Arrows indicating increasing/decreasing temperature.
Recommended Ambient Temperature range: 0°C to 44°C(32°F to 112°F)
Stainless Steel RTD temperature sensor
– 100 Shock resistant Thin Film RTD
– Standard 8″(20cm) or 12″(30cm) lengths
– Standard 0.25″(6.35mm) diameter
– Standard 0.188″ (4.76mm) reduced tip
Glass-Filled Nylon Enclosure with silicone buttons and a durable polyester graphics window.
Nominal Body Dimensions: 3 x 4.3 x 2.2cm (5.0 x 1.7 x 0.85″)
Nominal Weight: 150 grams
3V Lithium CR2032 coincell (over 100 hours service life at 21°C / 70°F)
Operating Temperature Range -20°C to 54°C (-4°F to 130°F)